Toyota Error Code P0500 – Vehicle Speed Sensor Malfunction

What Does Toyota Error Code P0500 Mean?

P0500 – Vehicle Speed Sensor Malfunction means your Toyota’s ECM has detected a malfunction that can impact engine control, emissions, or system performance. It can cause warning lights to appear and may affect related systems like VSC or TRAC.

When and Why It Appears

This code typically appears when:

• The engine is under load, accelerating, or idling roughly
• Sensors detect readings out of range or inconsistent
• Control modules detect faults in emissions or sensor feedback

⚠️ Common Symptoms of P0500

• Check Engine Light ON
• Stalling, misfiring, or hesitation
• Reduced fuel economy
• Loss of power or system disablement (e.g., VSC/TRAC)

Possible Causes

• Faulty or dirty MAF or oxygen sensors
• Vacuum or intake leaks
• Ignition coil, spark plug, or fuel injector failure
• Wiring harness issues or ECM faults

How to Diagnose P0500

1. Scan the car using an OBD-II scanner for all stored and pending codes
2. Check freeze frame data and sensor readings
3. Perform visual inspection on related wiring, connectors, hoses, and components
4. Use live data to compare MAF, O2, and fuel trims

How to Fix Toyota Error Code P0500

1. Repair or replace the faulty sensor or wiring
2. Clean air intake and throttle body if dirty
3. Test ignition and fuel delivery systems for defects
4. Clear the codes and perform a test drive

Estimated Repair Cost

• Sensor replacement: ₱2,000 – ₱6,000
• Ignition/Fuel repair: ₱1,500 – ₱4,000
• Diagnostics and labor: ₱1,000 – ₱2,000

❓ FAQ – Toyota P0500

Will this code cause long-term damage?

If ignored, it can affect performance and increase emissions. It’s best to address promptly.

Will clearing the code fix it?

Not unless the root issue is fixed. Codes may return if the problem is unresolved.

Can I still drive with this code?

Yes, but you may experience poor engine response or reduced safety system function.

Share This Page